Viscous coupling and radiator fan for 3.2L engine (6VD1-W) (Opel Frontera B)

Removal

Release the clamps and remove the upper fan shroud.

Unscrew 4 nuts and remove the radiator fan from the viscous coupling pulley.



Remove 2 bolts and 2 nuts and remove the fan pulley assembly from the cylinder block.

Installation

Install the fan pulley assembly onto the cylinder block and secure with bolts and nuts, tightening them to a torque of 24 N·m.



(Article posted on a web portal Opelbook.ru)

Warning: Make sure the yellow painted hole in the viscous coupling pulley is aligned with the blue colored stud.

Install the radiator fan on the viscous coupling pulley and secure with nuts, tightening them to a torque of 10 Nm.



Install the upper fan shroud and secure it with clamps.