Removing
1. Remove the lower arm (Chapter 5).
2. The bushings are tight and should be pressed out.
3. If a press is not available, pull out the bushings using a long bolt, nut, washers and socket or piece of metal tubing.
4. The vertical bushing should push up and the horizontal bushing forward.
Installation
5. Moisten the new bushings with soapy water, then install them using the method described in step 3.
6. Install the vertical bushing from below and the horizontal bushing from the front edge of the mount. The ends of the horizontal bushing must protrude from the lower arm by an equal distance.
7. Install the lower arm as described in chapter 5.
Visitor comments