Seat release levers are located on both sides of the backrest.
2. Squeeze one of the levers forward and lower the seatback down, laying it on the cushion.
3. The rear side of the seat cushion is attached to the passenger compartment floor with a centrally located latch.
4. To release the cushion, lift the release lever, then flip the seat assembly forward under the front seatbacks and secure it in place with the latch located on the floor.
5. To return the seat to its original position, release the latch of its holder.
6. Lower the seat onto the floor lock and press firmly down until it clicks into place.
7. The release lever should now be parallel to the floor.
Attention! The seat latch serves as an anchor for the rear seat belts and must therefore be securely engaged.
8. Return the rear seat back to its original position where it should automatically click into place.
Visitor comments