Rear view mirror adjustment drive (Opel Frontera A)

By adjusting the position of the rear-view mirrors on their supports, you can maximize the viewing sector of the areas behind and to the side of the car.

In addition, the interior rearview mirror has two fixed positions - day and night. The latter is intended to prevent the driver from being blinded by the reflected light from the headlights of vehicles moving behind at night. To change the mirror from day to night position, simply change its tilt in the vertical plane within the stationary range of the spherical support.

Door rear-view mirrors can be equipped with either manual or electric drive.

In the first case, the mirror position is adjusted using a handle installed inside the passenger compartment and mounted in the rear part of the mirror support.



The switch for the electric adjustment of the door mirrors is mounted in the handle of the driver's door of the car. By pressing the rotary switch to the left, you can use it to adjust the position of the left door mirror, and vice versa.



There is also electric heating of the outside mirrors, which is activated by pressing the button located under the rotary switch for controlling the position of the mirrors.

The heating switches off automatically after approximately 15 minutes.