Windshield wipers
The windshield wipers are activated using the right steering column stalk switch.
Below is a diagram of the correspondence between the positions of the switch lever rod and the wiper operating modes:
- = Wipers continue to operate only as long as the switch lever is held up
- O = Off
- - = Interval mode
- = slow
- = = Intense
Windshield and headlamp washers
1. To turn on the washer fluid, pull the right stalk towards you.
Washer fluid supply to the windshield and headlight lenses (with the appropriate configuration of the model) produced under high pressure. at the same time, several cycles of operation of the corresponding wipers are performed.
Periodically check the efficiency of the headlight lens washers (if any).
Tailgate glass cleaner and washer
1. The system is activated by moving the right stalk lever.
2. To turn on the intermittent wiper operation, turn the switch to the first position.
Turning the switch in any direction, overcoming the resistance developed by the spring, allows you to supply washer fluid to the glass, while simultaneously turning on several wiper cycles.
Visitor comments