1. Disconnect the wire from the terminal «minus» battery.
2. Remove the steering wheel (see Removal and installation of a steering wheel).
3. Remove the steering column (see Removal and installation of a steering column).
4. Turn out three screws of fastening of a casing of the lock of the ignition …
Note. This is how the ignition lock cover screws are located.
5.... and remove the casing.
6. Drill a head of a self-tapping bolt of a collar of fastening of the lock of ignition to a steering column, remove a collar and then the ignition lock.
7. Install the parts in the reverse order of removal.
Visitor comments