You will need a thin rod (e.g. drill).
1. Disconnect the wire from the terminal «minus» battery.
2. Remove the steering wheel (see Removal and installation of a steering wheel).
3. Remove the top..
4.... and the lower part of the casing of the steering column (see Removal and installation of a casing of a steering column).
5. Insert the key into the ignition..
6.... turn it to the first position..
7.... then, while holding the key turned, insert the rod (e.g. drill) into the service hole and push down the spring-loaded latch.
8. Remove the ignition lock cylinder from the lock housing.
9. Install the removed parts in the reverse order of removal.
Visitor comments