You will need: keys «at 13», «on 10», flat blade screwdriver.
1. Disconnect the wire from the terminal «minus» battery.
2. Mark the position of the wiper blade on the glass.
3. Open the edges of the protective cap..
4.... and remove it.
5. Turn away a fastening nut..
6.... and remove the wiper arm.
7. Remove the upholstery of the tailgate (see Removal and installation of an upholstery of a door of a back).
8. Press the retainer of the wiring harness block with a screwdriver..
9.... and disconnect the shoe from the gearmotor.
10. Turn out three bolts of fastening of an arm of a motor-reducer of a screen wiper of a door of a back..
11.... and remove the gearmotor.
12. If necessary, remove the sealing sleeve from the opening of the tailgate window glass. Replace heavily compressed, hardened or torn bushing.
13. Install the parts in the reverse order of removal.
Visitor comments