2. Remove the wiper arm (see Section 8).
3. Remove the upholstery of the tailgate (see chapter 11).
4. Disconnect the wiring connector (see resist. illustration) motor, unscrew the 3 mounting bolts, remove and carefully remove the motor from the tailgate.
10.4. Connector (1) wiring and bolts (indicated by arrows) rear window wiper motor mounting
5. Installation is made in an order, the return to an order of removal. Check that the motor drive is in the correct position, if necessary, connect the motor to the connector (connect the battery) and set the required position. At the end of the work, check the adjustment of the wiper lever.
Visitor comments