Car steering Opel Corsa C

Safety precautions when working with the steering system
Before performing any work on the steering components, carefully read the operating principle, operating rules of the SRS and safety precautions given in...

Removal and installation the driver's airbag module
1. The driver's front airbag module is built into the steering wheel hub. Before performing work, carefully read the requirements given in Section 1 . 2....

Removal and installation the steering wheel
Caution: Before performing any work near the air bag unit, steering column or instrument panel, turn off the SRS to avoid injury from accidental deployment (...

Removal and installation tie rod ends
1. Set the parking brake, jack up the front of the car and place it on stands, the wheels should rotate freely. 2. Check the steering rod ends for play by...

Removal and installation steering gear boots
1. Remove the appropriate tie rod end ( see Section 14 ). 2. Tighten the locknut (see illustration 14.4) from the steering rod, thoroughly clean the surface of...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: