Fog lamp adjustment — removal and installation Adjustment Check/correct tire pressure. Adjustment is carried out with the vehicle's own weight with one person or a load of 75 kg on the driver's seat. See...
Removal and installation of rear fog lights Removing Dismantle the protective lining of the rear wheel arch, unscrew the plastic fastening nut 1. Remove the Torx screw 3. Remove protective cover 3....
Replacing a High Beam Bulb Removing Remove the headlight bulb 1. Unscrew the protective cap (arrow). Disconnect harness connector 2. Take off ahead (arrow) spring clip from the retaining...
Replacing a dipped beam bulb Removing Remove the dipped beam bulb. Remove the protective cap (arrow). Press the bulb down while reconnecting the wiring harness3. Remove the incandescent...
Xenon headlight bulb replacement Removing Attention! The elements of the xenon dipped beam must not be touched when the dipped beam is on. Turn off the ignition and light switch. Headlight...
Turn signal bulb replacement (xenon headlight) Removing Remove the turn signal bulb. Unscrew cartridge 1 and remove together with the incandescent lamp. Remove the incandescent bulb from the socket....
Removal and installation of a starter of a xenon lamp Removing Remove the front trim. Dismantle the starter, unscrew screw 1. Pull out starter 2. Unlock harness connector 4 - Disconnect harness connectors 3, 4...
Replacing the front interior lamp / bulbs Removing Loosen the clips on the interior lamp cover with a plastic wedge (I). Replace the appropriate incandescent bulb. Carefully pry the base of the...