Removing
Attention! The elements of the xenon dipped beam must not be touched when the dipped beam is on. Turn off the ignition and light switch.
Headlight harness center connector must be disconnected.
Remove the headlights.
Remove the xenon headlight ignition module.
Unlock and remove the protective cap of the xenon headlight.
Unscrew the xenon lamp ballast 1.
Remove the xenon lamp 3x unscrew the screw from the retaining ring 1.
Remove the snap ring.
Remove xenon bulb 2.
Installation
Install a xenon lamp.
Note. Pay attention to coding.
Insert the circlip, tighten the circlip screw. OPEL CORSA 2427
Install the xenon headlight ignition module.
Connect the xenon lamp ballast and fix.
Install the protective cap of the xenon lamp.
Adjust headlights.
Check lamp operation.
Visitor comments