Attention! The elements of the xenon dipped beam must not be touched when the dipped beam is on. Turn off the ignition and light switch. Headlight harness center connector must be disconnected.
Removing
Remove the headlights.
Remove the protective cap 1 high beam/parking lights.
Dismantle the high beam incandescent lamp, disconnect the wiring harness connector 3 from the power supply.
Unlock and open the mounting bracket 2.
Remove the bulb 5.
Remove the parking light bulb.
Unlock cartridge 4 and remove with incandescent lamp.
Remove the incandescent bulb from the socket.
Installation
Install the parking light bulb.
Insert the incandescent bulb into the socket.
Insert the socket with the incandescent lamp.
Install the headlight bulb.
Note. Pay attention to coding.
Insert an incandescent lamp.
Attach the mounting bracket, connect the wire harness connector.
Insert the protective cap for the high beam/parking lights
Install headlights.
Adjust headlights.
Visitor comments