Diesel injection system Opel Corsa B

General information about the fuel injection system of a diesel engine
When a diesel engine is running, clean air is sucked into its cylinders and compressed to high pressure. The air temperature rises to 700 - 900°C, which...

Checking and adjusting maximum engine speed
Maximum engine speed is controlled by the ECM and cannot be adjusted by the car owner. Below is a description of the speed check procedure, adjustment requires...

Checking and adjusting fuel injection timing settings
The injection timing can be adjusted with the engine removed and installed. The adjustment on the installed engine is described below. For checking, an...

Checking the temperature sensitive element
The temperature sensitive element is screwed into the thermostat housing. 1. Drain the coolant so that its level is below the temperature-sensitive element. 2....

Removal and installation injectors
Damaged injectors can cause severe detonations during engine operation and cause bearing failure. If bearings are damaged, start the engine at idle speed and...

Fuel filter heating element
General information Due to the decrease in ambient temperature, the fluidity of diesel fuel also decreases due to the formation of paraffin in it. For this...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: