Removal, installation and adjustment of side doors Note: This section describes the removal/installation/adjustment procedure using the front side door as an example. The corresponding operations for the rear...
Removal and installation of side door locks Corsa models 1. Disconnect the wire from the negative terminal of the battery ( see chapter 5 ). 2. Remove the upholstery of the corresponding door ( see...
Removal and installation of the lock cylinder Note: This procedure is described below using the Corsa C model as an example. Removing 1. Remove the outer handle ( see Section 19 ). 2. Using a screwdriver,...
Removal and installation of the internal door handle Note: This procedure is described below using the Corsa C model as an example. 1. Remove the door upholstery ( see Section 23 ). 2. Peel off the insulating...
Removal and installation of a door rear-view mirror 1. Remove the front door triangular trim ( see Section 24 ). 2. If equipped, disconnect the mirror wiring connector (see resist. illustration). While...
Removal and installation of a sealant of a doorway 1. Open the door and remove the seal from the door frame (see resist. illustration). 30.1. sealant (1) doorway (on the example of the front side door): 2....