Removal and installation triangular trims on the front doors (Opel Corsa C)

1. If equipped, remove the rubber boot from the door rearview mirror position control lever.

2. Lower the window completely.

3. Separate the triangle trim from the door assembly by releasing the 5 fasteners (on Meriva models - 3 clamps) from the landing nests (see accompanying illustration), use a plastic wedge if necessary.

Note: Only one fastener is labeled in the illustration.

4. Remove the insulating mat from the pad and, having disconnected the speaker wiring connector from the back side, remove the pad.

5. Installation is carried out in the reverse order of removal.