Note: Below is a description of this procedure using the Corsa C model as an example.
1. Remove the door trim (see Section 23).
2. Separate the insulating film from the door frame as much as necessary to gain access to the relevant parts.
3. Push the inner door handle forward (see accompanying illustration) release it and remove it from the door assembly.
21.3. Press the inner door handle in the direction indicated by the arrow (corsa C models)
4. On the front door, pull out and disconnect the cable from the back of the interior handle.
5. On the rear door, remove the rod from the guide on the door assembly and separate it from the interior door handle.
Article posted on Internet portal: opelbook.ru
6. Installation is performed in the reverse order of removal. Replace the insulating film if necessary. Without slamming the door, check the operation of the locking mechanism.
Visitor comments