Contents: Corsa C models ⬇ Meriva Models ⬇
Corsa C models
1. Open the tailgate.
2. Remove 4 mounting screws, insert plastic wedge (for example, Hazet 799-3) under the door trim, press 7 fasteners (see accompanying illustration) and remove the trim from the tailgate.
15.2. Removing the trim (1) of the tailgate (corsa C models) - the arrows indicate the mounting screws
3. Installation is performed in the reverse order of removal. Replace all damaged fasteners with new ones.
Meriva Models
4. Open the tailgate, remove the 2 decorative plugs at the ends of the window frame trim and unscrew the mounting screws located underneath them (see accompanying illustration).
15.4. Fastening the trim (1) of the rear door window frame (meriva models): 2. Mounting screws
5. Using a plastic wedge, press out the 10 window frame trim fasteners (see illustration 15.4) and remove it from the tailgate.
Note: If you do not need to remove the frame trim, you do not need to perform this step.
6. Remove 4 mounting screws, insert a plastic wedge under the rear door trim (for example Hazet 799-3), press the 12 fasteners one by one and separate the upholstery (see accompanying illustration).
15.6. Fastening the lower trim (3) of the tailgate (meriva models) - the arrows indicate the mounting screws
(The article was published on the website OpelBook.ru)
7. Installation is carried out in the reverse order of removal.
Visitor comments