2. Disconnect the rod from the lock, unscrew the 3 screws and remove the lock latch housing from the tailgate (see accompanying illustration).
16.2. Screws (indicated by arrows) fastenings of the lock latch housing (2) of the rear door (corsa C models): 1. Traction
3. Loosen the 2 nuts (see accompanying illustration) and remove the outer handle of the tailgate. Disconnect the rod from the lock cylinder housing.
16.3. Fastening the cylinder (4) of the rear door lock (corsa C models) - the arrows indicate the nuts for fastening the outer handle: 1. Rod; 2. Electrical wiring connector; 3. Electric motor; 5. Locking bracket
4. Disconnect the cable from the negative terminal of the battery (see Chapter 5).
5. Disconnect the electrical wiring connector and remove the single lock actuator motor together with the lock cylinder housing from the tailgate (see accompanying illustration 16.3).
6. Loosen the 2 nuts, remove the drive rod locking bracket and disconnect the electric motor from the lock cylinder housing.
7. Installation is performed in the reverse order of removal. After installation, check the proper functioning of the locking mechanism with the tailgate open.
Visitor comments