Note: This procedure is described below using the Corsa C model as an example.
1. Install the mirror so that the top corner of the glass (arrow A) (see resist. illustration) was tilted to the right (on the right mirror - to the left) all the way to the mirror housing. Use your hand to pry the mirror glass from the side of the arrow (IN) and carefully remove the glass.
26.1. Removing the door mirror glass (Corsa C models)
2. With the appropriate equipment, disconnect the 2 wires of the mirror heating system from the back of the glass, while holding the riveted tabs of the contacts so as not to damage them.
3. Installation is made in the reverse order of removal. Don't forget to adjust the position of the mirror (see chapter «Controls and methods of operation»).
Visitor comments