Removing
Remove inner door trim.
Remove waterproof film.
Remove window guide.
Using a wooden or plastic wedge, remove the outer seal of the shaft in the door in an upward direction.
Having tilted the door glass, take it out of the door shaft.
Installation
Having tilted the door glass, install it from the outside in the shaft in the door, See fig. A8993.
Install the power window guide. Observe the functions of the power window; install the roller -1- in the guide -A-, the roller -2- in the glass guide.
Lubricate all sliding parts of the power window with a thin layer of Moly-paste. Press the outer seal for the shaft into the shaft in the door.
Carefully stick a water-repellent film on the openings in the door.
Install the inner door trim.
Visitor comments