Adjusting fog lights — removal and installation (Opel Corsa C)

Adjustment

Check/adjust the air pressure in the tires. Adjustment is performed at the vehicle's tare weight with one person or 75 kg of load on the driver's seat. See also the workflow "Checking and adjusting the headlights".

The fog lights can be adjusted using the adjusting mounting bolt 1 along the upper light-darkness boundary using the adjustment device. The light-darkness boundary runs horizontally along the adjustment line.

The angle of the fog lights is 20 cm per 10 m (corresponding to a beam angle of 2%).

Removing and installing headlights

Removal

Remove the front trim.

Remove the headlights.

Unlock and disconnect the wiring harness connector, remove the screw (arrows).

Installation

Install the headlights.

Connect the wire harness connector, tighten the screw.

Install the front trim.

Adjust the headlights.