2. Remove the front bumper cover (see Chapter 11).
3. Disconnect the horn wiring connector. Remove the mounting bolt (see accompanying illustration) and remove the horn.
6.3. Bolt (indicated by the arrow) horn mounts
(Text was copied from the portal: «opelbook.ru»)
Note: On Meriva models, the horn is located in front of the radiator grille. However, depending on the configuration, some models may have 2 additional horn horns installed on the left front wheel well side. To remove them, you also need to remove the front bumper cover.
4. Installation is performed in the reverse order of removal. Upon completion, check the proper functioning of the horn.
Visitor comments