2. Disconnect the wiring harnesses and ground cable from the fuse box.
3. Press the latches and release the fan and lighting relay holders and the main fuse holder (see resist. illustration). Disconnect the wiring harness from the front edge of the block.
4.3. Fasteners (indicated by arrows) fan relay holders (1), lighting (3) and main fuse (2) (Corsa C models)
4. Pull the relay and fuse holders out of the unit body and set aside with the wires connected.
5. Press out the mounting bracket (see resist. illustration) and release the expansion tank from the holder.
4.5. brace (arrow) expansion tank mounting (Corsa C models)
6. Loosen the ABS hydraulic modulator mounting bolts.
7. Turn out 2 fixing bolts and remove the block of safety locks.
8. Installation is carried out in the reverse order.
Visitor comments