2. Disconnect the cable from the negative terminal of the battery (see Chapter 5).
3. Remove the tailgate trim (see Chapter 11).
4. Disconnect the electrical wiring connector (see accompanying illustration) unscrew the 3 mounting bolts of the electric motor, remove it and carefully remove the electric motor from the tailgate.
10.4 Electrical wiring connector (1) and bolts (indicated by arrows) rear window wiper drive electric motor mounts
5. Installation is performed in the reverse order of removal. Make sure that the electric motor drive is in the appropriate position, if necessary, connect the electric motor to the connector (connect the battery) and set the required position. After finishing the work, check the adjustment of the wiper lever (see Section 7).
Original source on the website Opelbook.ru
Visitor comments