2. Disconnect the electrical wiring (see accompanying illustration) and disconnect the hoses from the windshield washer pump, while trying to prevent the washer fluid from leaking out.
8.2 Windscreen washer pump (2) and headlight cleaner pump (4): 1. Supply hoses; 3. Liquid level sensor
3. Remove the windshield washer pump upwards from the holders on the washer fluid reservoir.
4. Disconnect the fluid level sensor wiring connector and remove the sensor from the reservoir.
5. If equipped, disconnect the electrical connector, remove the hoses and remove the headlight washer pump from the reservoir holders.
6. Press the retaining clip and remove the washer fluid reservoir filler neck pipe (see accompanying illustration).
8.6 Fastening bracket (1) of the filler neck pipe of the washer fluid reservoir - the arrow indicates the direction of removal of the pipe
7. Remove the front bumper cover (see Chapter 11).
8. Loosen the 3 nuts (see accompanying illustration) and remove the washer fluid reservoir.
8.8 Nuts (indicated by arrows) fastenings of the reservoir (1) for the washer fluid
9. Installation is performed in the reverse order of removal. Upon completion of the work, fill the tank with fresh fluid.
Visitor comments