Contents: Removal ⬇ Installation ⬇
Removal
1. Disconnect the fuel line using pliers Mot. 1265 (figure 2.49).
Figure 2.49. Disconnect the fuel line using pliers Mot. 1265.
2. Remove the air filter.
3. Disconnect the wiring connector 6 from the throttle body (figure 2.50). Unscrew the two bolts 7 securing the throttle valve.
Figure 2.50. Disconnect wiring connector 6 from the throttle body. Unscrew the two bolts 7 securing the throttle valve.
Installation
4. Installation is carried out in the reverse order of removal.
Tightening torque
Throttle body bolt - 12 Nm.
Visitor comments