Models with 2.0L sohc engine
Removing
1. Disconnect the negative battery cable.
2. Disconnect the air pipe from the throttle body and air filter and remove the pipe.
3. Disconnect the accelerator cable and remove the cable mounting bracket from the intake manifold.
4. Pinch the water hoses and disconnect them from the throttle body. Disconnect the connectors.
5. Disconnect vacuum and vent hoses. Unscrew the fixing nuts and remove the throttle body.
Installation
Installation is carried out in the reverse order of removal.
Models with 2.0L dohc engine
Removing
1. Disconnect the negative battery cable. Release pressure from the supply system.
2. Disconnect the air temperature sensor and air flow sensor connectors (indicated by an arrow).
3. Disconnect the air hose from the cylinder head cover.
4. Loosen the clamps and remove the air intake pipe.
5. Disconnect the accelerator cable.
6. Loosen the connection nut (A), then unscrew the fixing bolt of the tube (B). Disconnect the fuel supply pipe and remove the mounting bracket.
7. Clamp the water hoses, release the mounting clamps and disconnect the hoses (indicated by arrows).
8. Disconnect the remaining connectors and vacuum hoses, unscrew the fixing nuts and remove the throttle body.
Installation
Installation is carried out in the reverse order of removal.
2.5L and 3.0L engines
Removing
1. Remove the top section of the intake manifold.
2. Loosen the mounting bolts and remove the throttle body.
Installation
Installation is carried out in the reverse order of removal. Replace o-rings.
Visitor comments