Automatic transmission specifications For models of later model years, see Appendix at the end of the Manual ( Section 13 ). Type - Aisin-Warner, four forward and one reverse, clutch lock in 4th...
Automatic transmission maintenance Checking the Fluid Level in an Automatic Transmission 8. Park the vehicle on level ground. Engine running, brakes applied, Move selector lever through all...
Automatic transmission — removal and installation 1. Disconnect the negative battery cable. 2. Move the selector lever to position «N». 3. Remove the dipstick from the pipe. 4. Unscrew the dipstick tube from...
Automatic transmission kickdown cable — replacement 1. On carbureted models, remove the air filter ( Section 3 ), then remove the detent spring and spring clip. Disconnect the cable cover from the segment disk...
Automatic transmission kickdown cable — adjustment Carburetor models 1. Remove the air filter ( Section 3 ). 2. Guided by Fig. 6.16, release the spring clip (A). 3. Release the throttle cable adjustment, then...
Automatic Transmission Select Lever Link — Adjustment 1. Place the car over a viewing hole. 2. Move the selector lever to position «N». 3. Disconnect the link from the lever on the transmission by releasing the...
Inhibitor switch — removal and installation 1. Move the selector lever to position «N». 2. Disconnect the inhibitor switch connector located on the baffle. Cut the strap securing the electrical wiring to...