Automatic transmission specifications Petrol 4-cylinder engines Engine mount bracket to box - 22 Suspension bracket to cylinder block - 40 Bolts of fastening of the hydrotransformer to the engine —...
General description of automatic transmission Attention! On later models, if the drive mode selection lever was in the P position when the wires were disconnected from the battery terminals, the lever will...
Transmission Fluid — Draining and Filling the Block Attention! A new main pan gasket will be required. If the intermediate pan must also be removed, purchase a new gasket for it as well. 1. The transmission does...
Oil seals — replacement Cardan shaft flange seal Attention! A new flange O-ring and mounting nut will be required. 1. Proceed as described in Section 8 , unfasten the front end of the...
Transmission Fluid Cooler — General Description 1. The transmission fluid cooler is integrated into the radiator. If the cooler is damaged, the complete radiator assembly must be replaced ( see related...
Automatic transmission — removal and installation Removing 1. Block the rear wheels, apply the handbrake and place the drive mode selector lever in position N. Jack up the front of the vehicle and place it...
Automatic Transmission Overhaul — General Description 1. Automatic transmission overhaul cannot be done by yourself, it must be entrusted to a specialist. 2. In case of transmission failure, it is necessary to...