5-door car trunk door lock servo drive (Opel Frontera B)

Removal

Disconnect the cable from the negative battery terminal.

Remove the 4 screws (1) securing the luggage compartment lid trim.





Using a flat, wide tool inserted between the tailgate trim and the door, release the 12 clips (1) and remove the tailgate trim.



Remove 3 screws (1) and remove brackets from the inner door panel.





Carefully remove the dust and moisture protection film from the luggage compartment door.



Remove 3 bolts (1) and remove the bracket from the luggage compartment door.



Remove the clamp (1) and disconnect the remote control rod of the lock from the servo motor.





Text was copied from the portal [opelbook.ru]



Remove 2 nuts (1) and remove the servo motor from the tailgate.

Disconnect the connector (1) from the servo motor.

Installation

Connect the connector (1) to the servo motor.



Install the central locking servo motor to the tailgate and secure it with 2 nuts.



Connect the remote control rod of the lock to the servo motor and secure the rod with the clamp (1).





Install the shaped bracket on the luggage compartment door and secure it with 3 bolts (1).



Carefully install the dust and moisture protection film on the luggage compartment door.



Install the brackets on the inner door panel and secure them with 3 screws (1).



Install the tailgate trim and secure it with 12 clips (1).





Install the 4 screws securing the tailgate trim.

Connect the cable to the negative terminal of the battery.