You will need an electric soldering iron.
1. Remove the back door upholstery (see Removal and installation of an upholstery of a back door).
2. On the inside of the door upholstery, soften the melted ends of the four plastic pins of the handle base with an electric soldering iron (shown in the photo with an arrow) and remove the outer handle by removing its pins from the holes in the door trim.
3. Install the new inner handle and removed parts in the reverse order of removal. After installing the handle in the door upholstery socket, fix it by melting the ends of the four base pins with a heated soldering iron.
Visitor comments