1. Disconnect the wire from the terminal «minus» battery.
2. Prying off the plug with a screwdriver..
3.... take it off..
4.... and unscrew the upper upholstery fixing screw.
5. Prying off the edge of the power window control switch with a screwdriver..
6.... remove the switch from the socket in the armrest..
7.... press the clamp of the wiring harness block..
8.... disconnect the wiring harness block from the switch and remove the switch.
9. Having pressed the spring latch of the armrest lining with a screwdriver..
10.... remove the lining.
11. Remove the upholstery fastening screw through the hole in the armrest.
12. Prying off the rear lower edge of the upholstery with a screwdriver..
13.... disconnect the upholstery from the door, overcoming the resistance of the holders.
14. Disconnect the upholstery from the door, overcoming the resistance of its holders.
Note. This is how the rear door upholstery holders are located.
15. Pry off the latch of the latch of the lock drive cable sheath with a screwdriver..
16.... remove the tip from the stop on the body of the inner door handle..
17.... disconnect the tip of the cable from the handle lever and remove the upholstery.
18. Establish an upholstery of a back door in an order, the return to removal.
Visitor comments