You will need: end head «on 10», flat blade screwdriver.
1. Disconnect the wire from the terminal «minus» battery.
2. Remove the lower part of the upholstery of the tailgate (see Removal and installation of an upholstery of a door of a back).
3. Pressing the latch..
4.... disconnect the wiring harness connector from the tailgate lock latch switch.
5. Turn away four nuts of fastening of an external slip.
6. Remove the outer lining of the tailgate by leading the wire harness through the hole in the tailgate.
7. Unclench the holders of the wiring harness block of the switch of the latch of the tailgate lock..
8.... and disconnect the block from the outer lining of the tailgate.
9. Use a screwdriver to press the two latches of the tailgate lock switch..
10.... and remove the switch.
11. Install the parts in the reverse order of removal.
Visitor comments