1. Remove the trunk trim on the right side in the direction of vehicle travel.
2. Press the locking tab of the wiring harness connector of the electric drive of the fuel tank filler pipe lid lock…
3. …and disconnect the shoe from the lock.
4. Slightly rocking the spring-loaded stop from side to side…
5. …remove it from the hole in the lid hinge bracket.
6. Use a screwdriver to pry up the rear edge of the hinge bracket…
7. …and remove it from engagement with the edge of the hatch, while simultaneously removing the rubber seal from the neck of the filler pipe.
8. From inside the trunk, press the fuel filler pipe hatch cover hinge bracket lock…
9. …and remove the bracket together with the lock and the filler cap.
10. Press the lock retainer…
11. …remove the shut-off plunger from the hole in the bracket…
12. …and remove the lock from the bracket.
Text copied from this portal OpelBook.ru
13. If necessary, disconnect the plug from the bracket by removing the connecting harness from the holder groove on the plug.
14. Install the parts in the reverse order of removal.
Visitor comments