You will need a socket «on 10».
1. Raise the glass to its highest position and remove the front door trim (see Removal and installation of an upholstery of a forward door).
2. Remove the speaker of the audio system (see Removing and installing speakers).
3. Turn out a bolt of fastening of the limiter to a forward rack of a body.
4. Pry up the edge of the restrictor seal..
5.... remove the seal from the hole in the door and remove it from the limiter.
6. Turn away two nuts of fastening of the limiter to a forward end face of a door.
7. Remove the stopper through the hole in the inner panel of the door under the speaker of the acoustic system.
8. Install the front door opening limiter and all removed parts in the reverse order of removal.
Visitor comments