Removing
1. Remove the door upholstery and protective film.
2. Lower the glass, remove the seal from the glass guide
3. Unscrew the top screw securing the rear glass guide.
4. Unscrew the back screw of fastening of a back guide of glass.
5. Remove the rear glass guide from the door.
6. Through the hole in the door, unscrew the nut securing the rear of the outside door handle.
7. Remove the outside door handle.
8. Disconnect the rods from the inner casing of the outer handle and the lock cylinder.
9. Remove the inner casing through the hole in the door.
Installation
Installation is made in sequence, return to removal.
Visitor comments