Door window lifter — removal and installation (Opel Vectra B)

Front door window lifter location



1. Manual window lift

2. Electric window lift

Removal

1. Remove the door trim and protective film.

Material copied from this resource OPELBOOK

2. When removing the front window regulator on models with an airbag, remove the side airbag sensor bracket.



3. Using adhesive tape, secure the glass in the open position.

4. On models with power windows, disconnect the window electrical connector.



5. Mark the position of the glass guide mounting adjustment screw and remove the screw.





6. Drill out the window regulator mounting rivets and



7. Remove the lever from the channel on the glass base.





8. Remove the window regulator from the door (in the photo on the left – the window regulator for the front door, in the photo on the right – the rear door).

Installation

1. Installation is performed in the reverse order of removal. Secure the window regulator using new rivets.



2. Flare the window regulator mounting rivets using a special tool.