Contents: Removal ⬇ Installation ⬇
Removal
1. Remove the door trim and protective film.
2. Lower the glass, unscrew the screws and remove the rear glass guide from the door.
3. If present, lift the plastic retainer and disconnect the connector from the central door locking system.
4. Remove the three screws and disconnect the rods from the lock cylinder and the outside door handle.
5. Remove the lock from the door, while lowering the door lock button through the hole in the door.
6. Disconnect the inner door opening handle rod.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments