Comment. The work is shown on the Astra model, on the Zafira model it is performed similarly. The door glass must be fully raised before performing the operation.
Execution sequence
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. Remove the door trim (see «Door upholstery model Astra - removal and installation» or «Upholstery of doors of the Zafira model - removal and installation»).
3. Peel off the plastic film from the back of the door.
4. Using a 10 mm wrench, unscrew the two nuts securing the inside of the handle.
5. We remove the inner part of the handle through the technological hole, while simultaneously disengaging the rod from engagement with the lock mechanism drive.
6. Disconnect the rod from the switch lever (larvae).
7. Remove the retaining ring of the lever.
8. Remove the lever.
9. Remove the lever return spring.
10. We remove the latch of the larva switch guide.
11. Turn the switch guide (larvae) counterclockwise and remove it.
12. Remove the switch from the inside of the handle (larva).
13. Remove the spring 1, the connecting washer 2, remove the locking balls 3 from the holder of the switch.
14. We install the parts in the reverse order.
Visitor comments