Contents: Removal ⬇ Installation ⬇
Removal
1. Open the trunk and disconnect the electrical connector from it.
2. Using a marker, mark the position of the hinges on the rack.
3. Unscrew the bolts and remove the trunk from the hinges.
4. To remove the hinges, disconnect the springs and unscrew the bolts securing the hinges to the body.
Installation
Installation is performed in the reverse order of removal. After installing the trunk lid, check that the gap along its perimeter and the car body elements is the same everywhere in the closed position. If necessary, adjust the position of the trunk lid by loosening the mounting bolts and, moving the lid within the elongated installation holes, find the required position.
Visitor comments