1. On models with an electric lid lock, disconnect the battery from the ground and disconnect the wires from the actuator. Tie the wires to the wire and pull them out of the cover.
2. Outline the contours of the hinges on the cover, unscrew the bolts and remove the cover with two people.
3. Installation is carried out in the reverse order. Pull the wires into the cover, tying them to the wire. On a new cover, rearrange all the parts from the removed (buffers, lock, wires, etc.). If necessary, adjust the position of the cover by moving it with the hinge bolts released, adjusting the height of the rubber buffers or the position of the lock latch.
Visitor comments