Lock
1. Remove the lock drum switch (see below).
2. Turn away 2 bolts and remove the lock.
3. When assembling, adjust the position of the lock.
Drum lock switch
4. Turn away 4 screws and remove an overlay of the switch of the lock.
5. Remove 2 nuts (these nuts simultaneously secure the lid handle) and remove the drum switch of the lock by disconnecting the drive rod.
Trunk lid latch
6. The retainer is bolted to the lower body panel.
7. To access the retainer mounting bolt, remove the cover by unscrewing the screws and removing the latches.
8. Designate position of a clamp, turn away a bolt and remove a clamp.
Visitor comments