Mounting screws are shown by arrows
1 - Plug
2 — a Protective cover of the lever of a gear change
3 - Storage pocket of the center console
4 - Protective cover of the parking brake lever
1. Disconnect the negative cable from the battery.
2. Remove the center cover under the parking brake control lever.
3. Engage the parking brake and remove the protective cover of the control lever from the center console (see illustration Center console installation details).
4. Release the lower edge of the protective cover of the gear lever from the latches on the center console (see illustration Center console installation details).
5. With the appropriate configuration, prying with a screwdriver, release the seat heating switches from the front of the center console.
6. On models equipped with traction control (TCS), Remove the TCS switch in the same manner.
7. Release the clamps, unscrew the fixing screws from the console and remove the ashtray.
A - Ashtray screws (Astra models)
B - Ashtray screws (Zafira models)
C - Center console mounting screws
A.
1 - Facing panel
B.
C.
8. Disconnect the electrical wiring from the cigarette lighter.
9. Remove plugs (where installed) and remove the console mounting screws, two screws are installed on the sides of the assembly, one is under the parking brake lever, and another one is in the front of the console.
10. Raise the center console from the floor and take it out of the passenger compartment.
11. Installation is carried out in the reverse order.
Visitor comments