Removal and installation the upper adjustable seat belt anchors (Opel Astra G)

Front belts

1. Remove the upper B-pillar trim (see Removal and installation of interior trim panels).

2. Remove the two TORX type mounting screws and remove the upper adjustable anchor assembly from the B-pillar (see illustration Front Seat Belt Fastening Diagram).

3. Installation is carried out in the reverse order. The upper part of the regulator is marked with two arrows, which should point upwards.

Rear belts

General information

The procedure is the same as described above for the front belts - to gain access you need to remove the side trim panel (see Removal and installation of interior trim panels).