Corsa C, 3-door hatchback
1. Separate the upper anchor bracket from the adjuster guide on the B-pillar.
2. Remove the B-pillar top trim (see Section 44).
3. Remove the 2 screws and remove the upper seat belt anchor height adjuster from the rack.
4. Installation is carried out in the reverse order.
Corsa C, 5-door hatchback
5. Remove the B-pillar top trim (see Section 44).
6. Separate the upper anchor bracket from the adjuster rail on the B-pillar.
7. Using a plastic wedge (e.g. Hazet 1965-20) Carefully remove the cover from the B-pillar by removing the top and bottom plugs from the holes in the body.
Note: When removed, the cover is damaged and must be replaced without fail.
8. Using a socket wrench, loosen the 2 outer nuts securing the top anchor height adjuster and remove it from the B-pillar.
9. Installation is carried out in the reverse order.
Visitor comments