Note: This procedure is described below using the Corsa C model as an example. On Meriva models, the removal / installation of the trim is carried out in a similar order.
1. Open the tailgate, pull the hooks, separate from the tailgate sill and press down the carpet panel (see resist. illustration).
48.1. Fasteners (indicated by arrows) carpet panels on tailgate sill (on the example of the Corsa C model): 1. Special hook
2. Separate the rubber seal of the tailgate opening from the threshold, unscrew the fixing screws and remove the threshold trim (see resist. illustration).
48.2. screws (indicated by arrows) lining fasteners (1) tailgate sill (on the example of the Corsa C model)
3. Install in the reverse order of removal, making sure that the inner edge of the seal is on top of the trim. Check that the hooks are properly fastened.
Visitor comments