Corsa C, 3-door hatchback
1. Remove the rear seat and rear seat back (see Section 55).
2. Remove the decorative cover of the upper seat belt anchor, unscrew the fixing screw and remove the bracket from the C-pillar (see resist. illustration).
52.2. Rear seat belt anchor (3 door hatchback): 1. Top anchor bracket; 2. Return device; 3. Bottom anchor; 4. Hole for a belt in the trim panel
3. Remove the C-pillar trim (see Section 46).
4. Remove luggage compartment side trim (see Section 49).
5. Remove the fixing screw (arrow B) and remove the rear belt recoil mechanism (see illustration 52.2), then remove the bottom anchor screw (arrow C) and remove the anchor from the floor.
6. Remove the seat belt by pulling it through the hole in the trim panel (see illustration 52.2).
7. Installation is carried out in the reverse order.
Corsa C, 5-door hatchback
8. Remove a back seat and a back of a back seat.
9. Separate the top anchor bracket from the C-pillar.
10. Remove trim C and D pillars (see Section 46).
11. Remove luggage compartment side trim (see Section 49).
12. Remove the rear sill trim panel (see Section 42).
13. Remove the rear seat belt recoil mechanism and, by unscrewing the fastening screw, separate the lower belt anchor from the floor. Remove the belt from the passenger compartment.
14. Installation is carried out in the reverse order.
Visitor comments