Rear seat belt and drum (Opel Vectra B)

Removal

1. Open the rear door and remove the door seal in the wheel arch area.



2. Remove the side trim that covers the seat belt drum. Unscrew the mounting bolt and remove the drum.



3. Remove the threshold trim, then unscrew the bolt securing the seat belt to the floor (arrow).





4. Remove the cover, then unscrew the upper seat belt mounting bolt, noting the location of the washers and gaskets.



5. Move the rear seat cushion up and forward and remove the seat belt buckle mounting bolts located in the center.

Installation

Installation is carried out in the reverse order of removal.