Clutch technical data
| Clutch drive | Hydraulic |
| Type | Dry with pressure plate and diaphragm spring |
| Outer diameter of pressure plate, mm: - car with 6VD1-W engine | 260 |
| - vehicles with engines X 22 DTH and Y 22 DTH | 241 |
| - cars with engines X 22 SE and Y 22 SE | 241 |
| Pressure plate pressing force, N: - nominal: - car with 6VD1-W engine | 7203 |
| - vehicles with engines X 22 DTH and Y 22 DTH | 6500 |
| - cars with engines X 22 SE and Y 22 SE | 6500 |
| - minimum acceptable: - car with 6VD1-W engine | 6468 |
| - vehicles with engines X 22 DTH and Y 22 DTH | 6050 |
| - cars with engines X 22 SE and Y 22 SE | 5050 |
| Friction lining diameter (external x internal), mm - car with 6VD1-W engine | 260x170 |
| - vehicles with engines X 22 DTH and Y 22 DTH | 240x155 |
| - cars with engines X 22 SE and Y 22 SE | 240x155 |
| Thickness, mm: - with the clutch disengaged: - car with 6VD1-W engine | 8,6 |
| - vehicles with engines X 22 DTH and Y 22 DTH | - |
| - cars with engines X 22 SE and Y 22 SE | - |
| - with the clutch engaged: - car with 6VD1-W engine | 8,0 |
| - vehicles with engines X 22 DTH and Y 22 DTH | 8,4 |
| - cars with engines X 22 SEn Y 22 SE | 8,4 |
| Friction surface area, cm²: - car with 6VD1-W engine | 304x2 |
| - vehicles with engines X 22 DTH and Y 22 DTH | 264x2 |
| - cars with engines X 22 SE and Y 22 SE | 264x2 |
| Clutch pedal installation height, mm | 216-266 |
| Free travel of clutch pedal, mm | 0,5-1,5 |
| Clutch hydraulic fluid | dOT4 brake fluid |
Tightening torques for threaded connections, Nm
| Connecting nut for fastening the tube to the clutch master cylinder | 16-20 |
| Connecting nut for fastening the tube to the hose | 27 |
| Nuts securing the clutch master cylinder to the engine compartment bulkhead | 16 |
| Clutch slave cylinder mounting bolts | 40 |
| Connecting nut for fastening the hose to the clutch slave cylinder | 20 |
| Clutch Master Cylinder Pusher Lock Nut | 17 |
| Clutch pedal bracket mounting nuts | 15 |
| Bolts for fastening the housing with the pressure plate of the clutch of the pressure type | 18 |
| Clutch pressure plate casing mounting bolts pull type | 20 |
| Clutch release fork bracket to front crankcase mounting bolts | 38 |
[Original posted on the website: opelbook.ru]
Visitor comments